Product Description
Company Info
Product Description
Specification of xenon lamp:
1: Available voltage and wattage
12V 75W
2. HID bulbs available
Single beam bulb:
H1, H3, H3C, H4, H7, H7R, H8, H9. H10. H11. H13.9004(HB1), 9005(HB3). 9006(HB4), 9007(HB5), D1C(D1S/D1R), D2C(D2S/D2R),
D4C(D4S/D4R), 880/881, 5202 etc.
3. Color temperature
3000k--------Golden Yellow 4300k--------Extreme White
6000k--------Diamond White 8000k---------Iceberg Blue
10000k-------Brilliant Blue 12000k---------Violet Purple
Method of installing the bulb and step-up transformer
1, Please fix the stability instrument tightly with double-sided tape and make the two ends are firm.
2, Please connect the port of bulb with the port of power supply(Red port, black port).
Please check up after the installation
1. Make sure the two electrodes of wire are not connected reversedly.
2. Make sure the connection of wire is neither too tight nor too loose. And no extrusion.
Restoration and the operation
1. Make sure the parts taken apart beforehand for the installtation return to their original places.
2. Please check up the effectivevess of the work of long-distance light and short-distance light.
3. Please check up the work of other automobile parts(lamps, automobile sound sets, screen wipers and etc. )
Solution of malfunctions
1. Malfunction of bulb
*Solution: Please separate the top of bulb from the interior shiedld with
A distance of 5mm by using a wrench.
*Problem: It may change the focus of light.
2. Poor electric discharge effects of the beam/ray gas
Lack of power input may lead to the bulb glittering or poor discharge
Effect
*Solution: Add an additional relay-set to stabilize electri voltage
*Problem: There may be some noise when opening the light.
NOTICE IN OPERATION
1. Please wait for the entire cool-down of the car lighting and engine for the sake of safety in installation.
2. Before the installation, please confirm that the gear is at "N" or "P"
3. Please insure that the swith is offen installation.
4. Be careful to avoid scald, especially in turning on/off the car lighting.
5. Be careful to avoid beating and cutting bulbs, not to touch bulbs with fingers, which will bring blots.
6. Be careful to examine the connection of the contator, ports and voltaic wire, False connection will bring lighting prolems.
7. Please let the end of bulb not touch the interrior light shield of the headlight assembly when adjusting the bulb.
8. Please drill a hole of 25mm in the back cap of resin or rubber on the headlight
9. In connecting the bulb and the step-up transformer, do not connect the wrong electrode.
10. In putting through the power supply of a step-up transformer, do not connect the wrong dlectrod.
1: Available voltage and wattage
12V 75W
2. HID bulbs available
Single beam bulb:
H1, H3, H3C, H4, H7, H7R, H8, H9. H10. H11. H13.9004(HB1), 9005(HB3). 9006(HB4), 9007(HB5), D1C(D1S/D1R), D2C(D2S/D2R),
D4C(D4S/D4R), 880/881, 5202 etc.
3. Color temperature
3000k--------Golden Yellow 4300k--------Extreme White
6000k--------Diamond White 8000k---------Iceberg Blue
10000k-------Brilliant Blue 12000k---------Violet Purple
Method of installing the bulb and step-up transformer
1, Please fix the stability instrument tightly with double-sided tape and make the two ends are firm.
2, Please connect the port of bulb with the port of power supply(Red port, black port).
Please check up after the installation
1. Make sure the two electrodes of wire are not connected reversedly.
2. Make sure the connection of wire is neither too tight nor too loose. And no extrusion.
Restoration and the operation
1. Make sure the parts taken apart beforehand for the installtation return to their original places.
2. Please check up the effectivevess of the work of long-distance light and short-distance light.
3. Please check up the work of other automobile parts(lamps, automobile sound sets, screen wipers and etc. )
Solution of malfunctions
1. Malfunction of bulb
*Solution: Please separate the top of bulb from the interior shiedld with
A distance of 5mm by using a wrench.
*Problem: It may change the focus of light.
2. Poor electric discharge effects of the beam/ray gas
Lack of power input may lead to the bulb glittering or poor discharge
Effect
*Solution: Add an additional relay-set to stabilize electri voltage
*Problem: There may be some noise when opening the light.
NOTICE IN OPERATION
1. Please wait for the entire cool-down of the car lighting and engine for the sake of safety in installation.
2. Before the installation, please confirm that the gear is at "N" or "P"
3. Please insure that the swith is offen installation.
4. Be careful to avoid scald, especially in turning on/off the car lighting.
5. Be careful to avoid beating and cutting bulbs, not to touch bulbs with fingers, which will bring blots.
6. Be careful to examine the connection of the contator, ports and voltaic wire, False connection will bring lighting prolems.
7. Please let the end of bulb not touch the interrior light shield of the headlight assembly when adjusting the bulb.
8. Please drill a hole of 25mm in the back cap of resin or rubber on the headlight
9. In connecting the bulb and the step-up transformer, do not connect the wrong electrode.
10. In putting through the power supply of a step-up transformer, do not connect the wrong dlectrod.
Address:
Room171-172, B Area Fuyi International Auto Supplies City No. 49, Yongfu Road, Yuexiu district, Guangzhou
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Auto, Motorcycle Parts & Accessories, Lights & Lighting
Main Products:
HID Kit, Xenon, HID Lamp, HID Conversion Kit, Xenon Lamp, Xenon Light, Ballast, HID Xenon, HID Ballast, Work Lights
Company Introduction:
Sanli technology is one of the professional manufacturer of the HID xenon lamp and ballast in China. Our Main products are HID xenon kits, ballast, xenon bulbs and other peripheral products. (like some LED lights for car).
We has specialized in researching and developing new technology of auto lighting for many years. After those years rapid development, we already became a professional enterprise in auto lighting area and built our own brand "Oupai". During the process of manufacturing, raw materials selection and products inspection, we have been paying more attention to controlling and improving the quality.
Our products have been supplied to more than 100 countries in south America and North America, Europe and MID-East, Asia and Africa. We have a good reputation in our customers from worldwide depondent on our individual quality.
We welcome domestic and foreign customers to visit us. Please feel free to discuss you OEM enquiries with us by email.
E-OEM service is offered.
We has specialized in researching and developing new technology of auto lighting for many years. After those years rapid development, we already became a professional enterprise in auto lighting area and built our own brand "Oupai". During the process of manufacturing, raw materials selection and products inspection, we have been paying more attention to controlling and improving the quality.
Our products have been supplied to more than 100 countries in south America and North America, Europe and MID-East, Asia and Africa. We have a good reputation in our customers from worldwide depondent on our individual quality.
We welcome domestic and foreign customers to visit us. Please feel free to discuss you OEM enquiries with us by email.
E-OEM service is offered.
